When vacuuming, certain carpets may generate small static charges in the Clear bin or wand. These are not associated with the electricity Use only as described in this manual. Use only with Dyson-recommended attachments, accessories, and replacement parts. supply. To minimize any effect from this, do not put your hand or insert...
Please read this guide Box contents carefully before using Assembling your DC14. Using your DC14 Washing your filter Using your DC14 tools Emptying the Clear bin Cleaning the Clear bin Clearing blockages Brushbar maintenance Optional accessory use and maintenance Troubleshooting tips Limited warranty and customer care www.dyson.com...
B Slide wand straight down secure with clip. in to hose until it clicks To quickly release cord, into place. Ensure hose rotate upper cord hook does not bend. downward. Rotate cord hook back up before re-winding cord. www.dyson.com...
Some carpets will fuzz if a rotating brushbar is used when you tilt the handle backwards vacuuming. If this happens, we recommend vacuuming in bare floors mode and consulting to begin vacuuming. with your flooring manufacturer. 1-866-693-9766 Dyson Helpline contact us at...
The filter may require more and remove filter. refitting onto the machine. frequent washing based on • Only wash blue foam individual vacuuming habits. and yellow case. Check regularly. • Wash filter and case until water runs clear. www.dyson.com...
18690_DC14_US_OPS_MAN 8/23/07 9:53 AM Page 8 Using your DC14 tools CAUTION • Powerful suction can cause the hose to ‘pull back’ in use – please take care when using the hose. • To avoid personal injury and to prevent the...
Clear bin. Press catch A to release B Line up the front and rear Clear bin. guides and push down to click into place. Ensure the Clear bin is secure before replacing on the machine. 1-866-693-9766 Dyson Helpline contact us at...
• Turn power off and unplug before checking for blockages. Failure to do so could result in electric shock or personal injury. DC14 wand •If any part of your machine becomes blocked, it may overheat and then automatically shut off.
2 Remove lint and hair securely with the bottom of from brushbar. the cleaner head to achieve optimal performance. Check the alignment of the soleplate with the front edge of the cleaner head. 1-866-693-9766 Dyson Helpline contact us at...
Model 08909 Dyson Car Cleaning Kit accessories. If used in a garage, care should be taken to wipe the soleplate and wheels with...
Page 14
Wait 30 minutes Sprinkle Zorb onto carpet Work into carpet pile Extend and flex Use with or without brush Ensure machine is Wait 30 minutes turned off Vacuum the carpet 1-866-693-9766 Dyson Helpline contact us at...
Machine turns off in use • Remove and check washable filter to see if it is clean (filter should be blue in illustration of your DC14. color). Wash filter if necessary as shown on page 7. • If you removed the soleplate, it must be refitted flush with the cleaner head. If it is If this does not help with not, refit soleplate as shown on page 12 and re-check performance.
• Service under this warranty will not extend the period of this warranty. • If your machine is not functioning properly, please call the Dyson Helpline at 1 - 866 - 693 - 9766. Most issues can be rectified over the telephone by our trained customer care staff.
Page 17
This limitation is not allowed by some states and so this limitation may not apply to you. • Your remedy for breach of this warranty is limited to the warranty service described above. Dyson, Inc. will not be liable for any consequential damages or incidental damages you may incur in connection with your purchase and use of your vacuum cleaner.
Page 18
18690_DC14_US_OPS_MAN 8/23/07 9:53 AM Page 18 www.dyson.com...
Need help?
Do you have a question about the DC14 and is the answer not in the manual?
Questions and answers