NEC KT-X46UN User Manual page 53

If this page can not be reached, :
Confirm that the display is powered on and connected to the PC either directly or via a HUB.
•
Confirm that the IP address assigned to the display is at the default value, by performing a LAN RESET
•
from the OSD on the display.
Confirm that the EXTERNAL CONTROL setting on the OSD is set to LAN.
•
Try refreshing the web page in the browser. It may take several refreshes before the display can be found.
•
Check if any firewall software or settings on the PC could be preventing access to the display's IP
•
address.
Once the web page has appeared, the display's IP address and subnet mask can be entered and updated in the
display. It is highly recommended to assign each display a static IP address so that the IP address will not be
reassigned to another device if the network is reset.
Note: Once the IP address is updated, the display will no longer be accessible from the current IP address.
Next restore the original network settings on the PC.
NEC Display Wall Calibrator - UsEr's GUiDE |