Reset Panel - NEC KT-X46UN User Manual

Reset panel

loading a Project file, and using this function to restore the calibration settings to the displays.
These functions can either be applied to the selected display, or all displays by selecting the appropriate setting
in Apply to:.
NEC Display Wall Calibrator - UsEr's GUiDE | 
This panel is used to reset and restore measurements and
settings.
Reset Measurement Data - Will clear all of the measurements
taken during the Measurement phase of the calibration.
Reset Calibration Data - Will clear all of the calibration data
including measurements and adjustment settings. It will not
reset any settings in the displays.
Restore Calibration Settings - Will re-configure displays
with the settings from the last calibration. This can be useful
to switch between different calibrations by loading different
projects, and restoring the calibration data to all of the
displays.
Since the calibration settings are stored as part of the Project
files, entire wall calibrations can be restored as necessary by