Epson Zip-100M (Mac Installation & User Manual page 8

7
Check the green power light to make sure
the power supply is OK.
(If the power light does not come one, refer to the
"Troubleshooting " section of this manual.)
Green Power Light
Amber Data Light
(Flashes when drive is transferring data)
8
Turn your computer on.
MAC USERS
Hold down the Shift key and start your Mac. Make sure you
hold down the Shift key until you see the message indicating
that extensions are disabled.
9
Insert the 100MB Took disk into the ZIP Drive.
Always make sure the green power light is on before inserting
(or ejecting) a ZIP disk. When you insert a ZIP disk, the amber
data light on the ZIP Drive will flash momentarily.
MAC USERS
when the ZIP disk icon appears on the Macintosh Desktop.
To eject a ZIP disk from the Desktop, drag the ZIP disk icon to
the Trash icon.
6