Epson Zip-100M (Mac Installation & User Manual page 6

4
Connect the other end of the cable to the
SCSI connector on your computer.
MAC USERS
See illustration below.
POWERBOOK USERS
You need a special PowerBook cable or adapter to connect the
ZIP Drive. Refer to the section for PowerBook Users at the start
of this guide.
PC USERS
and NOT to a parallel port (printer port). The parallel port is the same
size and shape as some SCSI adapter
will not support this model of the ZIP Drive.
If your adapter has a 50 pin SCSI connector: Use a 25 to
n
50 pin SCSI cable or cable converter to connect the ZIP Drive.
If you need a cable or converter, call your computer dealer or
contact E
Make sure you connect the ZIP cable to a SCSI connector
PSON
at 1-800-922-8911.
4
connectors,
but the parallel port