Setting Up For Hp-Ux System - Epson C823461 (Ethernet User Manual

Setting up for HP-UX System

There are two methods of printing from HP UX, ftp and rlp
(lpr). Both are set up using SAM. Enter the IP address and Host
name in the /etc/hosts file before starting SAM.
RLP Setup
On the printer definition page of SAM, use the following
settings:
Printer Name:
Remote System Name:
Remote Printer Name:
Remote Council Model:
Remote Status Model:
Make System Default:
Printer Class:
Restrict Council:
Remote Printer on BSD system:
Use 'lpd -d printer name' or rlp to print.
FTP SCRIPT
Type:
Then create a model script:
and enter:
MODEL='basename $0'
REALMODEL='echo $0 /sed -e "s%$MODEL %model.lan
/$MODEL%"'
Any name
Use the host name in /etc/hosts
nothing or 'Ipa', 'Ipaf' etc if using
filters.
/bin/true
/bin/true
Enter as appropriate
Leave out
Leave out
Leave out
lpshut
lpadmin -p{spoolername} -m{modelscript}
-v/dev/null
accept {spoolername} enable {spoolername)
lpsched
vi/usr/spool/lp/model/lan.model
Using UNIX 5-13