Canon VK-16 v2.0 Administrator's Manual page 96

Register Camera Server
Note
●
Configure External Device Input
●
Assign a location and zone
Note
96
The recording streams can only be used for JPEG recording at
10 fps or less. They cannot be used for JPEG recording at
rates higher than 10 fps or for MPEG-4 recording.
The recording streams cannot accept requests from multiple
Storage Server.
If recording stream requests are made to one VB-C60 from
multiple clients, the second and subsequent requests return
errors and connect in normal mode.
The recording stream supports network interruption due to the
video-size, image quality, and frame rate.
Enter the Camera Name in up to 15 characters.
Changing the Camera Name setting here does not change the
camera name of the Camera Server.
To switch On or Off the external device
input, check the Invert the state of the
following external option.
One or more inputs may be shown depending
on the type of the Camera Server. It is not
necessary to change this setting if it is not
required.
If multiple Cam tabs are shown to the
1
right of the screen, select a tab for
the Camera Server to edit settings.
Change the name of the Camera
2
Server in the Camera Name field as
required.