Canon VK-16 v2.0 Administrator's Manual page 112

Set Normal Schedule
●
Set the recording period
Tip
●
Select a day of the week to record video
Note
112
Time period could be set for overnight recording such as
'Start 22:00 to End 08:00'.
Click All Day if you want 24 hour recording. The Start and End
times will be set at 00:00 respectively.
If you have defined any special day schedules, at that time the
schedules will override normal schedule times for the whole
day.
Times are given in 24 hours
If Camera Server has been configured with Restrict Service
Time, VK-64/VK-16 will not be able to record from the Camera
Server during restricted times.
The time zone used for the recording schedule will be the time
of PC where the Storage Server is running.
The Storage Server will adjust for Daylight Savings if
configured in the operating system.
Click the hours or minutes fields to
select, then click the up/down
arrows or directly enter a value to
change time.
In the Repeat on area, check the
days you wish to repeat the
recording period you have set in the
Times area above.