Using the Machine for Fax Only
Set the fax receive mode to <Auto>.
1
Switch to the Fax mode (
2
▲
▼
Press [
] or [
] to highlight <RX Mode>, and then press [OK].
3
▲
▼
Press [
] or [
] to highlight <Auto>, and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
When a Fax or Call Comes In
When a fax comes in, the machine automatically begins receiving the fax after two rings.
If a voice call comes in, the caller will hear a fax tone.
To change the number of rings before the machine receives a fax, press
] (Menu) <Fax RX Settings> <RX Function Settings>
[
<Incoming Ring> <On>, and then specify the number of rings.
Using the Machine for Faxing and Phoning
Set the fax receive mode to <Fax/Tel Auto Switch>.
1
Switch to the Fax mode (
2
▲
▼
Press [
] or [
] to highlight <RX Mode>, and then press [OK].
3
▲
▼
Press [
] or [
] to highlight <Fax/Tel Auto Switch>, and then press [OK].
RX Mode
Auto
Fax/Tel Auto Switch
Manual
Answering Machine
4
Specify ring settings.
<Ring Start
Specify how long the machine will attempt to detect a fax tone
Time>
before the machine starts ringing (4-30 seconds).
<Incoming
Specify how long the machine will ring during an incoming call
Ring Time>
(15-300 seconds).
Specify how the machine should behave when an incoming call
is not answered:
<After Ring>
•
<End>: Disconnects the call.
•
<RX>: Receives a fax.
5
After you have specifi ed the setting, press [
<Apply>, and then press [OK].
→
p.16).
→
p.16).
▲
] or [
▼
] to highlight
61