Asus ESC4000 G2 User Manual page 145

To enter the Intel ® Rapid Storage Technology enterprise SATA/SCU option ROM
utility:
1. Install all the Serial ATA/SAS hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
ID Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
1. If you want to use SAS HDD for RAID create, be sure you've already
correctly installed the optional ASRK module on the motherboard.
2. The RAID BIOS setup screThe RAID BIOS setup screens shown in this
section are for reference only and may not exactly match the items on your
screen.
The utility supports maximum four hard disk drives for RAID configuration.
ASUS ESC4000 G2 Series
[ MAIN MENU
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Serial # Size Type/Status(Vol ID)
HWAS0000991753TR 279.3GB
37VN00009846RAJ1 279.3GB
397600009846UEDY 279.3GB
GWC50000991756G6 279.3GB
[ESC]-Exit
All Rights Reserved.
]
]
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select Menu
6-25