Table of Contents
Advertisement
3
Solutions to Common Problems
COOKTOP ZONECONTROL D(SP_YS EAND2 D)G(TS LED
MA)NCONTROL D)SP_YS
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
I
_
[]
[]
[]
[]
[]
I
[]
[]
[]
•
Induction Cooktop main control has detected
a fault or error condition. Try turning
electrical power supply OFF and back ON to cooktop in order to reset Cooktop main
controls
If fault recurs, record fault number and turn power supply to Cooktop OFR
COOK(NG ZONELEDCON_NUOUSWF_SHES F
()NDUCT(ON
COOK(NG Z ONES ONL_
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
*
Induction Cooktop pan detection sensors do not see the correct cookware. Test with a
magnet to be sure cookware is made with Induction compatible material.
,
Cookware has been removed from the Cooking Zone without turning the Cooking Zone
OFR Place cookware back on to the Cooking Zone or if finished cooking turn off the
affected Cooking Zone.
.
Cookware is not centered over the Cooking Zone properly. Refer to page 15 for correct
cookware placement.
SCRATCHES OR ABRAS(ONS ON CERAMIC GLASS
COOKTOPSURFACE
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
• Coarse particles (such as salt or sand) are between cooktop and utensil. Be sure cooktop
surface and bottom of utensils are clean before use. Small scratches do not affect cooking
and will become less visible with use.
• Cleaning materials not recommended
for glass ceramic cooktop have been used. See
Ceramic-Glass
Cooktop
section in this Owner's Guide.
• Cook-ware with rough bottom has been used. Use flat-bottomed,
smooth utensils. See
Selecting Surface Cooking
Utensils
in this Owner's Guide.
METAL _¼RKSONCE_M(C G_SS COOKTOP SURFACE
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
• Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on
cook'top surface. Use a mildly abrasive cleanser to remove marks.
Hide quick links:
Advertisement
Table of Contents
