Connecting A Vcr And Cable Box - Toshiba 50HM66 - 50" Rear Projection TV Installation Manual

DLP_Inst.book Page 10 Wednesday, February 22, 2006 6:18 PM

Connecting a VCR and Cable box

You will need:
• signal splitter
• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR has S-video,
connect an S-video cable (plus the audio cables) instead
of the standard video cable. Do not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR's audio out terminal using the white audio cable
only.
– When you use a Cable box, you may not be able to use
the remote control to program or access certain features
on the TV.
Note: The VIDEO/AUDIO OUT terminals output signals from
the ANT 1, ANT 2, VIDEO 1, and VIDEO 2 terminals when the
appropriate input mode is selected.*
Cable box Signal splitter
IN
OUT
CH 3
CH 4
OUT
Stereo VCR
VIDEO
IN from ANT
CH 3
CH 4
OUT to TV
TV
To view basic Cable channels and use the TV's
features:
Select the ANT 1 video input source on the TV.* Use the TV
controls (control panel or remote control) to change channels
and access the TV's features.
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT 2 video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel the
Cable box output is set to). Use the Cable box controls to
change channels.
10
Connecting your TV
From Cable TV
IN
OUT
AUDIO
L R
IN
IN
OUT
L R
To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- Operating Guide). To program the TV remote control to operate
other devices, see the Operating Guide, Chapter 2.
To enable the TV Guide On Screen™ system to
work with your cable box and to use the TV Guide
On Screen™ recording features (if applicable to
your TV model):
1 Connect the G-LINK™ cable according to the
instructions (- page 17).
2 Make sure the VCR is connected to the VIDEO/
AUDIO OUT terminals on the TV (see illustration).
3 Set the VCR to the appropriate line input (refer to your
VCR owner's manual for details), and then turn OFF
the VCR.
4
See the TV Guide On Screen™ Interactive Program
Guide for details on setting up and using the TV Guide
On Screen™ system.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.
DLP Inst (E/F) Web 213:276