Printagent Program Menus; Printagent Program Menu Commands - NEC 4650NX - SuperScript Color Laser Printer Network Manual

PrintAgent Program Menus

PrintAgent program menus are available two ways.
• In Windows 95/98, Windows 2000, or Windows NT,
press the Start button, select Programs, and NEC
PrintAgent System to display PrintAgent commands.
• Once you have started PrintAgent, you can click on the
PrintAgent icon (the green planet) in the taskbar at the
bottom right corner of your Windows desktop.
First access the PrintAgent program from here...
46 SuperScript Color Laser Network Guide

PrintAgent Program Menu Commands

Start
PrintAgent will also start automatically when you decide to
print or use the Property pages. Keeping it running speeds
print time because you won't have to wait for PrintAgent to
start up every time you print. In order to monitor printer
status, PrintAgent must be running. When PrintAgent first
starts, a red planet icon appears in the Windows taskbar in
the lower right-hand corner of the screen. If the planet
doesn't turn green after five seconds, PrintAgent did not
launch properly. Restart your computer and try again.
Stop
To stop PrintAgent, left-click on the PrintAgent icon on the
Taskbar and select Stop from the popup menu.
Monitor a Printer
Select this from the taskbar to monitor any PrintAgent
printer on your network.
PrintAgent
Taskbar Icon
...then you can access PrintAgent
from the icon on the taskbar