Table of Contents

Advertisement

Check the brake fluid level with the
motorcycle in an upright position.
Brake fluid must be added to the reservoir
whenever the fluid level begins to reach
the LOWER level mark.
1. Remove the reservoir cap, reservoir cap
plate, and diaphragm.
2. Fill the reservoir with recommended
brake fluid from a sealed container up
to the UPPER level mark.
RECOMMENDED BRAKE FLUID is
DOT3
3. Reinstall the diaphragm, reservoir cap
plate and cap securely.
Other checks :
Make sure there are no fluid leaks.
Check for deterioration or cracks in the
hose and fitting.
Check the brake pad for wear when
refilling with brake fluid.

TIRES

<TIRE PRESSURE CHECK>
Check for an appropriate level of air
pressure by examining how the tire sits on
the ground. If you notice any abnormali-
ties in the shape of the tire with regard to
the area contacting the ground, use a tire
gauge to check tire pressure and adjust the
tire pressure to the appropriate level.
<TIRE PRESSURE>
FRONT
110/70-17 54P
SIZE
REAR
140/60-17 69P
FRONT
WITH ONE
TIRE
PERSON
REAR
PRESSURE
FRONT
WITH TWO
(kgf/ )
PERSON
REAR
2.00
2.00
2.00
2.25
21

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROADWIN 125 FI and is the answer not in the manual?

Questions and answers

Michelle Mifsud
March 15, 2025

I lost the key of the motorcycle Daelim Roadwim of 2005and I want to change the petrol cap because I can't open it

1 comments:
Mr. Anderson
March 15, 2025

The manual does not provide specific instructions for changing the petrol cap without a key. However, since the fuel fill cap requires the ignition key to open, you may need to contact a Daelim dealer for assistance or consider obtaining a replacement key using the key number plate provided with the motorcycle.

This answer is automatically generated

This manual is also suitable for:

Roadwin vj125e

Table of Contents

Save PDF