Installing The Canoscan Toolbox; System Requirements - Canon CanoScan D1230UF User Manual

2. Installing the CanoScan Toolbox

System Requirements

The following indicates the minimum CanoScan Toolbox system requirements:
Computers:
System:
Memory Requirements:
Hard Disk Space:
Installing the CanoScan Toolbox
Installing the CanoScan Toolbox is very simple.
To install the CanoScan Toolbox:
1. Insert the CanoScan Setup Utility CD-ROM accompanied with the scanner into your CD-ROM
drive. Inserting the CanoScan Setup Utility CD-ROM automatically displays the main menu.
2. Choose the Install the Software command from the main menu and select the CanoScan Toolbox
option.
3. Follow the on-screen instructions to start the installation. Click [Install].
4. When you finish the installation, click [Quit].
Installing the Plug-in
You should locate the Plug-in Module CS in the same folder where the CanoScan Toolbox locates.
When you install the Plug-in Module CS with the CanoScan Setup Utility CD-ROM, you should specify
also the folder name where the CanoScan Toolbox locates (usually CanoScan Toolbox).
CanoScan Toolbox
Power Macintosh which standardly equips the proper interface for
connection with the scanner
(Macintosh compatibles are not supported)
Mac OS 8.5 ~ 9
32 MB or more (64 MB or more recommended)
50 MB (5 MB for the application and 40-50 MB to store scanned images)
5