Using Plug-In; Using The Editing Commands - Canon CanoScan D1230UF User Manual

Using Plug-in

You can utilize CanoScan Toolbox effectively by using various image adjusting and enhancing functions
of Plug-in Module CS. Refer to the Plug-in Module CS User's Guide bundled with your scanner for its
installation and functions.

Using the Editing Commands

The commands on the [Edit] menu allow you to cut, copy, paste, clear, select all, deselect, and set
scanning
preferences for images.
Undo
To reverse the effects of a command you have selected, choose the [Undo] command.
Cut
To cut a portion of the image:
1. Select an area to cut using the select tool.
2. Choose the [Cut] command.
Copy
To copy a portion of the image:
1. Select an area to copy using the select tool.
2. Choose the [Copy] command.
Paste
To paste a selection onto the image:
1. Place the cursor where you want to put the selection.
2. Choose the [Paste] command.
Clear
To delete a portion of the image:
1. Select an area to delete by using the select tool.
2. Choose the [Clear] command.
Select All
To select everything in the image, choose the [Select All] command.
None
To deselect items you have selected using either the [Lasso] or [Select] tools, choose the [None]
command.
CanoScan Toolbox 22