Reset; Access Card - DirecTV HR20 User Manual

System Setup

Reset

The Reset screen lets you restart the receiver, reset to factory defaults, or reset
everything.
"Restart Receiver" is the same function as pressing the red reset button
behind the access card door on the front of the receiver. This option does
not affect your settings and scheduled recordings.
"Reset Defaults" erases all of your personal preference items, such as
parental controls, favorites, language and scheduled recordings, and
restores the receiver configuration to how it was set at the factory.
"Reset Everything": Completely erases everything from system memory
and starts over like a new receiver.
erased from the hard drive!
Note:
If Parental Controls are locked, you must enter your password to reset the receiver.

Access Card

Do not select Access Card unless you have a new access card provided by
DIRECTV. DIRECTV will provide new access cards and instructions when
necessary. Follow the onscreen directions to replace your access card.
You will need your old and new access cards to complete this process.
DIRECTV DVR
® USER GUIDE
106
WARNING: All your recordings will be
Standard
-Definition DVRs