Advertisement
Additionally make sure that the Status column in the Slave side displays
Auto mode. If not you will need to right click on the Presonus line in the
Slave side again and select Auto.
Finally and ultimately hit APPLY for all of these settings to take effect.
You can also make a save file of the current configuration. Go to the
Patchbay' s file menu and select Save As. Give it a name and save it to the
desktop. In the future you can double click on this file and it will run the
Patchbay and open it with the saved configuration. Then all you will need
to do is hit APPLY.
Advertisement
