Selecting The On-Screen Display Language; Selecting The Video Input System Mode (Input 2 Or 3 Mode Only) - Sharp PG-C20XE - Notevision SXGA LCD Projector Operation Manual

Selecting the On-screen Display Language

Projector
ON/OFF
LAMP
POWER
2, 3
TEMP.
KEYSTONE
2, 4
INPUT AUTO SYNC
1, 5
BACK ENTER MENU
(GUI) On-screen Display

Selecting the Video Input System Mode (INPUT 2 or 3 mode only)

Projector
ON/OFF
LAMP
POWER
2, 3
TEMP.
KEYSTONE
2, 4
AUTO SYNC
INPUT
1, 5
BACK ENTER MENU
(GUI) On-screen Display
Remote control English is the preset language for the On-screen
Display. The language can be set to English, German,
Spanish, Dutch, French, Italian, Swedish, Portuguese,
Chinese, Korean or Japanese.
1 Press MENU.
2 Press ∂/ƒ to select "Language", and then press
3 Press ∂/ƒ to select the desired language.
4 Press ENTER to save the setting. The On-screen
5 To exit from the GUI, press MENU.
Remote control The video input system mode is preset to "Auto";
however, it can be changed to a specific system mode,
if the selected system mode is not compatible with the
connected audiovisual equipment.
1 Press MENU.
2 Press ∂/ƒ to select "Video System", and then
3 Press ∂/ƒ to select the desired video system
4 Press ENTER to save the setting.
5 To exit from the GUI, press MENU.
• When the system mode is set to "Auto", you may not receive
a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
ENTER.
Display is now programmed to display in the
language selected.
press ENTER.
mode.
26