Image Mode Presentation Command; Image Mode Movie Command; Image Mode Srgb Command; Image Mode Bright Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Basic Serial Command Specifications
6.16

Image mode Presentation Command

COMMAND "C11" [CR]
Set Image mode to Presentation.
This command changes Image mode immediately into Presentation
Detail
The projector shows the OSD "Image mode Presentation" on the screen at
receiving the command.
Acceptable
Response
Unacceptable
6.17

Image mode Movie Command

COMMAND "C12" [CR]
Set Image mode to Movie.
This command changes Image mode immediately into Movie.
Detail
The projector shows the OSD "Image mode Movie" on the screen at receiving
the command.
Acceptable
Response
Unacceptable
6.18

Image mode sRGB Command

COMMAND "C13" [CR]
Set Image mode to sRGB.
This command changes Image mode immediately into sRGB.
Detail
The projector shows the OSD "Image mode sRGB" on the screen at receiving
the command.
Acceptable
Response
Unacceptable
6.19

Image mode Bright Command

COMMAND "C14" [CR]
Set Image mode to Bright.
This command changes Image mode immediately into Bright.
Detail
The projector shows the OSD "Image mode Bright" on the screen at receiving
the command.
Acceptable
Response
Unacceptable

6.20 Image mode User 1 Command

COMMAND "C15" [CR]
Set Image mode to User 1.
This command changes Image mode immediately into User 1.
Detail
The projector shows the OSD "Image mode User 1" on the screen at receiving
the command.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
11 / 17