Save A Set; Load A Set - Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Chapter 4 Controlling the Projector

Save a Set

1
Decide your desired PC adjustment val-
ues through the PC Adjustment pages
"1"to "2".
2
Display the page "3" and select a mode
number* with the pull-down menu but-
1
ton of the Save to. Type a memo into the
Memo text area for simple description of
your selected number.
3
Register by pressing the Set button.
To restore the adjustments, press the
Reset button.
It is displayed with "Stored" or "Free" for
the memo of Mode1 to Mode5. The memo
of ExMode6 to ExMode50 can be stored
into the selected mode.

Load a Set

Select a set to load with the pull-down menu button of the Load Setting No. and press the
Set button. The stored setting values will be applied to the each PC adjustment item.
* 1 Available mode may differ from the actual depending on the projector's model type.
Type1: Mode1 to Mode5, ExMode6 to ExMode50
Type2: Mode1 to Mode10, ExMode11 to ExMode50
The Display settings can be stored up to 50 sets, Mode1 to Mode5(Mode10) are stored into
the projector and ExMode6(ExMode11) to ExMode50 are stored into the Network Board.
40
Select a mode by
clicking the button
Type a memo for
the selected mode
Select a load mode
by clocking the but-
ton