Login The Setting Page Of The Projector; Enter The Ip Address; Select A Display Mode And Login - Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Chapter 3 Basic Setting and Operation
This chapter describes basic operations and settings for controlling the projector via a
network using this product. It is required that computer and projector are connected
to the network and the network address be properly configured.

Login the setting page of the projector

1

Enter the IP address

Launch the web browser installed in
your computer, enter the IP address into
the "Address" on the browser and then
press the "Enter" key.
Enter the IP address that you configured in chapter "Network Configuration" (
default IP address is [192.168.0.2].
2

Select a display mode and login

This product provides 2 types of control mode, Graphic Mode and Text Mode as
the below. Select a proper mode to match your computer and network environ-
ment by clicking on the text link.
Once you select your desired display mode, the setting page you selected display
mode will be displayed automatically from the next login. To change the display
mode, click "Top" on the lower-left corner of the setting page ( p.27).
If the setting page has set the password, the authenti-
cation window will appear. In this case type "user" onto
the User Name text area and the login password onto
the Password text area and then press the OK button.
* The entering User Name must be "user" and it cannot
be changed.
[Note]
When accessing projector for the first time or setting the no password [0000], the auto-login
will be performed and the next main setting page is displayed.
26
Graphic Mode Displays with 600 x 400 dots and
the menus and settings with
graphic icons. This mode is rec-
ommended for standard use.
Text Mode Displays with 200 x 300 dots. This
mode is optimized for use of the
handheld computer, PDA, etc. It is
also convenient if the network
traffic is heavy.
p.16-22). The