Enabling Snmp - Canon LV-7275 Starter Manual

Step 6: CLICK on the Settings button.
Step 7: CLICK on the TCP/IP tab.
Step 8: Change the IP Address and Subnet Mask to
a NEW IP Address within your network.
Step 9: CLICK on the Apply button to apply and save
changes.
II

ENABLING SNMP

First: Make sure the IP address on your computer
is in the same network as the projector in
order to change the projector's IP address.
Second: Open up Internet Explorer and TYPE in
the NEW IP Address you have assigned
to the REALiS Projector.
Third: TYPE in the following:
User Name: root (all lower case)
Password: system (all lower case)
Fourth: CLICK on the OK button.
Step 1: CLICK on the SNMP tab.
Step 2: In the SNMP drop down menu select from
V1, V2c, and V3. For this example SELECT
V1.
Step 3: In the Receive community box TYPE in a
SNMP name (for example) public.
Step 4: CLICK on the Apply button to apply and
save changes.
TCP/IP
Step 9
Step 8
IP address
Subnet mask
I address
Default gateway
Step 7
TCP/IP
SNMP
Step 4
Step 2
Step 3
Step 1
Step 6
192.168.254.254
255.255.255.0
192.168.100.2
0.0.0.0