Canon 7215 - LV XGA LCD Projector Specification page 33

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
9 Status Read Command
9.1 FORMAT
１. PC issues Commands as below
"CR_COMMAND" [CR]
COMMAND: Character Line
２. When projector receives the appropriate Command, it returns a character line as the
required data.
"000_"%1 [CR]
%1:Required Data (character line)
3. When receiving data cannot be decode, the projector returns "?" [CR]
9.2 Transfer Example
Get total dots of projector by expand Commands
PC
PC
9.3 Operation Requirement
Should be always operated
9.4 IMAGECOMMAND
9.4.1 CR_BRIGHTCOMMAND
COMMAND
Details
Response
9.4.2 CR_CONTCOMMAND
COMMAND
Details
Response
9.4.3 CR_COLORCOMMAND
COMMAND
Details
Response
PJ :"CR TDOTS" [CR]
PJ :"000 1344" [CR]
"CR_BRIGHT" [CR]
Get Contrast of user Control
Acceptable "000_%a" [CR]
%a "000"-- "063"
Unacceptable "?" [CR]
"CR_CONT" [CR]
Get Contrast of user Control
Acceptable "000_%a" [CR]
%a "000"-- "063"
Unacceptable "?" [CR]
"CR_COLOR" [CR]
Get Color value of user Control
Acceptable "000_%a" [CR]
%a "000"-- "063"
Unacceptable "?" [CR]
Page 33