Canon 7215 - LV XGA LCD Projector Specification page 28

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable
Response
Unacceptable
8.11 Setting COMMAND
8.11.1 CF_BBACK COMMAND
COMMAND "CF_BBACK_%1" [CR]
"ON"------ Select Blue Back
%1
"OFF"---- Cancel Blue Back
Set/cancel Blue Back. (Only valid when it is in the usual Power ON status.)
Details The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.2 CF_DISPCOMMAND
COMMAND "CF_DISP_%1" [CR]
"ON"------ Select Display
%1
"OFF"----Cancel Display
Set/Cancel Display. (Only valid when it is in the usual Power ON status.)
Details The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.3 CF_LOGOCOMMAND
COMMAND "CF_LOGO_%1" [CR]
"OFF".................... Cancel Logo
"DEFAULT".... Set Default Logo Display
%1
"ＵＳＥＲ"................ Set Captured Logo Display
Set/Cancel Logo. (Only valid when it is in the usual Power ON status.)
Details The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.11.4 CF_CEILCOMMAND
COMMAND "CF_CEIL_%1" [CR]
"ON"------ Select Ceiling
%1
"OFF"---- Cancel Ceiling
Set/Cancel Ceiling (Only valid when it is in the usual Power ON status.)
Details The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 28