Advertisement
| Haic)ge.
Lig
LIGHT
OPERATION
iNSTRUCTiONS
1. Make sure light switch on the control panel is in the "OFF" position.
2. Connect light plug to an extension cord, then put the extension
cord plug into the outlet on the wall.
3. Turn the light switch to "ON".
• Keep any electrical supply cord away from any
heated surface.
• Use the shortest length extension cord required.
Do not connect 2 or more extension cords together.
1.
2.
3.
Extension cord,
for out door use
Bulb
Replacement
A Make sure light switch on the control panel is in the "OFF" position and adapter plug is disconnected from outlet.
Release the screw securing the light
socket.
Take out the socket and remove the lens.
Loosen the two screws which are
locking the bulb.
Pull out the bulb and replace
with a new bulb.
Reverse instructionsfrom step 3
through step 1 to re-install socket.
c.uT,o.
Takecarenot to touch the bulb with your barefingers.
Touching bulb with your skincanleavea film on the
bulb that causesit to burn out quickly.
12. 464222609
Continuedon nextpage
Advertisement
