Table of Contents
Advertisement
chrono graphs wiTh date , day anD Month
Setting the time, date, day and Month
. Pull out the crown to position . The watch stops.
. Turn the crown until you reach the correct time.
. Push the crown back into position 0. To set the time to the exact second,
it must be pushed back in at the exact second. please observe aM/pM
clock rythm. The watch will begin running again.
. Press the corrector C until you reach the correct date. if you change
the date between 9:00pm and 12:00pm, it must be set to the following
day as dates set between these hours do not automatically change at
midnight.
. Press the corrector D until you reach the correct day.
. Press the corrector e until you reach the correct month.
chrono graphs wiTh date , day anD Month
display Elements
Day & Month
Hour hand
Minute hand
Second hand
Minute counter
Center stop - second
Date
1/10 sec counter
(hour counter after 30 minutes)
Control Buttons
Day . Corrector D
Month . Corrector E
Push Button A
0
1
2
Crown
Push Button B
Date . Corrector C
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INVICTA and is the answer not in the manual?
Questions and answers
How do I adjust the watch band on the coalition forces Vulcan X
To adjust the watch band on the Invicta Coalition Forces Vulcan X, follow these steps:
1. Identify the direction of the arrows on the bracelet, which indicate the direction to push the pins.
2. Use the quick release band adjustment tool to push the pins in the direction of the arrows.
3. Once the pin is partially released, remove it completely with your fingers.
4. If needed, repeat the process to remove additional links.
5. To reassemble, insert the pin back in the opposite direction it was removed.
6. Use a mallet to gently tap the pin into place.
This method allows you to resize the watch band easily.
This answer is automatically generated