Sanyo HECSR1000K - Stiffness Sensor - Multi Roller Massage Chair Service Manual page 7

Sensor-automated
Massage
Sensor-automated massage judges stiffness feeling by measuring changes of physiological
amounts of perspiration, pulses, skin temperature during detection massage, displays the
degree of stiffness feeling in three colors, and carries out massage suited for stiffness feeling.
Method and action of sensor-automated massage
1. Place fingers at two places of sensor section of the remote controller.
2. Press "ON/OFF" operation button.
3. Choose "Relax" or "Recovery from fatigue" and press button.
LED lamp of the course chosen is lighted red.
Relax course: (Gently massages in such a manner as to relax the whole body.)
Recovery from fatigue course: (Steadily massages with special emphasis placed on portions with stiffness feeling.)
Press the sensor section A with the forefinger.
Lightly press the sensor section B with the thumb.
4. Detection massage begins (about 3 minutes).
Neck/shoulder, back, waist, and legs are tapped, massaged, and tap-massaged, and stiffness
feeling is judged in four stages and indicated in three colors
(leg sections are massaged with rollers only).
If fingers are released from sensor sections during detection massage, no accurate measurement
can be made. When accurate judgment is unable to be made, indicator lamps for stiffness feeling
judgment do not go on and standard massaging operation takes place.
5. Upon completion of detection massage, a buzzer comes on and massage of the course
chosen takes place.
6.
Based on stiffness feeling judged in four stages by detection massage, massage suited for stiffness feeling is
carried out for about 10minutes by varying speed and time with respect to standard action of each course.
When "Relax" course is chosen:
Each massage at portions with stiffness feeling is carried out at slower speed and in shorter time.
Each massage at relaxed portions is carried out at standard speed and in longer time.
In the case of normal portions, each massage takes place at standard speed and time.
When "Recovery from fatigue" course is chosen:
Each massage at portions with stiffness feeling is carried out at standard speed and in longer time.
Each massage at relaxed portions is carried out at faster speed and in shorter time
n the case of normal portions, each massage takes place at standard speed and time.
If "Pains" judgment is obtained by detection massage, massage speed is decreased and time is
also decreased for both courses.
(When it is judged that the back aches, massage of the back is omitted.)
If courses are changed after detection massage, massage is carried out from the very beginning of
the course changed.
Press the button of the course to be chosen.
- 7 -
HEC-DR21
(TAIWAN)