Radio - Panasonic CQ-5109U Operating Instructions Manual

Troubleshooting (continued)
The speaker channels are
reversed between
right and left.
The sound field is not clear
in the stereo mode. Central
sound does not settled.
The power fails
unintentionally.
Clock time is reset.

Radio

Poor reception or noise
The number of auto preset
stations is less than 6.
CD
No playback or disc ejected
Sound skipping or noise
Sound skipping due to
vibration
Disc unejectable
22
The speaker wiring is confused between right and left.
Perform the speaker wiring in accordance with the wiring dia-
a
gram.
The plus and minus terminals at right and left channels of speakers are
connected reversely.
Perform the speaker wiring in accordance with the wiring dia-
a
gram.
The safety device works.
Consult your dealer or an authorized Panasonic Servicenter.
a
Battery cable is not correctly connected.
Connect the battery cable to the terminal that is always active.
a
Antenna installation or wiring of antenna cable is faulty.
Check whether the antenna mounting position and its wiring are
a
correct. In addition, check to see whether the antenna ground is
securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film
antenna, etc.).
Check the wiring of the antenna battery lead.
a
The number of receivable stations is less than 6.
Move to an area where receivable stations number is maximum,
a
and try presetting.
The disc is inserted upside down.
Insert a disc correctly.
a
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc.
a
There is a flaw or foreign material on the disc.
Remove the foreign material, or use a flawless disc.
a
The unit is not sufficiently secured.
Secure the unit to the console box.
a
The unit is tilted at over 30˚ in the front-to-end direction.
Make the angle 30˚ or less.
a
Something such as a peeled label obstructs the disc coming out.
Consult your dealer or an authorized Panasonic Servicenter.
a
The microcontroller in the unit operates abnormally due to noise or
other factors.
Unplug the power cord and plug it again. In case the unit is still
a
out of order, consult your dealer or an authorized Panasonic
Servicenter.