Panasonic CQ-5109U Operating Instructions Manual page 19

Function settings (continued)
Parental lock setting mode
This function disables the audience from selecting
the locked channel.
1
Press and hold [SEL] for more than 2
seconds to open SXM function setting
screen.
2
When "D. TUNING" is displayed, press
[SEL] to select parental lock setting
mode.
3
Enter a 4-digit passcode, then press
[BAND] when finished.
q Press [ d ] or [ s ] to select a number.
w Press [BAND] to shift to the right adjacent
digit.
A digit where entry is determined is indicated
as " * ".
e Repeat the steps q and w to enter a 4-digit
number.
Note: (Default: 1111). If you want to initialize the
passcode, press and hold [DISP] for more than 10
seconds while passcode entry, the 4-digit passcode
will return to the default.
Press [TUNE/SEEK }] or [TUNE/SEEK
4
{] to select a channel.
5
Press [BAND] to switch a select channel
to be locked or unlocked.
Note: Channel 0 (CH 0) and Channel 1 (CH 1) can
not be locked.
6
When done selecting the locked chan-
nels, press [DISP] to exit the function set-
ting or press [SEL] to change the parental
lock ON/OFF setting.
OR
To set parental lock ON/OFF:
4
5
(Parental lock
setting mode)
6
OR
To change the parental lock passcode:
4
5
6
unlocked
locked
Press [SEL] to open lock ON/OFF mode
after step 3.
Turn [SEL] to switch between lock ON or
OFF.
When done selecting the parental lock
ON/OFF setting, press [SEL] to exit the
function setting mode.
Press and hold [BAND] for more than 2
seconds after step 3.
Enter a new 4-digit code, then press
[BAND] when finished.
q Press [ d ] or [ s ] to select a number.
w Press [BAND] to shift to the right adjacent
digit.
A digit where entry is determined is indicated
as " * ".
e Repeat the steps q and w to enter a 4-digit
number.
Repeat step 5 to confirm the new code.
"CODE SET" is displayed for 2 seconds and the
new code setting is finished, then returns to
channel locked/unlocked setting display.
(Default)
(New code entry
mode)
19