Freeing Up Storage Space; Restarting Vls Device Emulations - HP 12000 User Manual

NOTE: Deleting a barcode template does not affect the cartridges that were created using it.
To add or delete a barcode template, from Command View VLS:
1. Click the System tab.
2. Select Cartridges in the navigation tree.
3. Click Add/Remove Barcode Templates in the task bar. The Add/Remove Barcode Templates
window opens.
4. To delete a barcode template, click the Remove button for the barcode template.
The window refreshes when the deletion operation is finished.
5. To add a barcode template:
a. Enter the barcode prefix (one to five alpha characters) in the Barcode Prefix box.
b. Enter the number of digits for the barcode number in the Digit Length box.
c. Enter the barcode suffix (one to two alpha characters) in the Barcode Suffix box.
d. Enter the starting barcode number in the Starting # box.
e. Click Add to add the new barcode template.
f. To add another barcode template, repeat these steps.

Freeing up Storage Space

Storage space can be freed up by erasing the data on or destroying virtual media that is no longer
used, such as:
Cartridges that are no longer used by a backup application
Cartridges that have been moved to the Firesafe that are no longer needed
Use the backup application to erase data on virtual media that is no longer used.
Destroy virtual media that is no longer needed using Command View VLS. See
Cartridges" (page
NOTE: Reducing the size of the cartridges in a virtual library will not free up disk space. Storage
space is dynamically assigned by the VLS as it is used. It is not reserved.

Restarting VLS Device Emulations

Restart VLS device emulations:
If the VLS locks up
After destroying a virtual device (library or tape drive) on the VLS and doing so leaves a gap
in the virtual device LUN numbering on an Fibre Channel host port
107).
"Destroying
Freeing up Storage Space 109