Adjusting The Clock; Setting The Timer - Yamaha MCR-040 Owner's Manual

USING USEFUL FUNCTIONS
■ Setting dimmer, tone/balance and power saving mode
DIMMER: Changes the brightness of the front panel display.
TREBLE : Adjusts the high frequency response.
*
BASS * : Adjusts the low frequency response.
BALANCE: Adjusts the volume level of each left and right speaker channel.
POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the
unit by playback operation on your iPod during standby mode. The default setting is NORMAL. This function is
available only for MCR-140.
WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc., sold
separately). The default setting is NO. This function is available only for MCR-140.
* Also effective when you are using headphones.

■ Adjusting the clock

AUTO CLOCK: Automatic adjustment function is available for Europe, U.K. and Australia models only. To apply for
this function, set AUTO CLOCK to ON.
CLOCK SET: To set hour and minute, repeat steps 3 and 4 on page 13.
y
The current time appears on the front panel display for a certain period by pressing and holding DISPLAY if the time setting has
completed.
Note
The time setting is lost once the power cable is disconnected from the wall outlet.

■ Setting the timer

TIMER SET: To select the following setting items, repeat steps 3 and 4 on page 13.
y
You can enter TIMER SET directly by pressing and holding TIMER.
Time (hour and minute)
Running time
You can choose the running time from 10 minutes to 90 minutes in 10 minute increments.
"– –" means the unit will not be set to standby mode automatically.
Input source and track/file number or preset number
Notes
• If the source is not set properly, the timer sound will not be heard. Make sure that the source is set securely.
• MCR-140: When you select an iPod as the input source, you need to set the iPod in the charging cradle on the unit.
iPod:
When you select the iPod as a source, this unit resumes the music that you were listening to last time.
CD:
Set a track/file number.
If you set the track/file number which is not exist, the first track/file is played back automatically.
FM:
Set preset number.
By selecting "– –", the FM station you set last time is set.
DAB:
Set preset number.
By selecting "– –", the DAB station you set last time is set.
USB:
Set a file number.
If you set a file number that does not exist, the first file is played back automatically.
14
En