Resize Objects To Match The Stage Size - MACROMEDIA FLASH 8-FLASH Tutorials Manual

110 Basic Tasks: Use Layout Tools
Resize objects to match the
Stage size
When you changed the Stage size, art on the Stage extended off the Stage
and into the workspace. You can easily resize the art to match the Stage
size again.
1. On the Stage, click the gray mountains to select them. Shift-click the
blue banner at the top of the Stage to add it to the selection.
2. Open the Align panel (Window > Align).
Tooltips appear in the Align panel showing the names of alignment
options.
3.
In the Align panel, select To Stage; then, under Match Size, select
Match Width. The size of the selected art changes to match the width
of the Stage.
4.
Still in the Align panel, click Align Left Edge.
The art aligns to the left edge of the Stage.
5.
In the Timeline, click the Bevel layer to select it.
6.
From the Library panel (Window > Library), drag the bevel graphic to
any area toward the bottom of the Stage.
7. In the Align panel, verify that To Stage is still selected, and click Match
Width.
8.
Click Align Left Edge and Align Bottom Edge.
The bevel aligns to the bottom edge of the Stage.
9.
Close the Library panel and the Align panel.