MACROMEDIA COLFUSION MX 7 - CONFIGURING AND ADMINISTERING COLDFUSION MX Manual page 29

Before you use the
check box in the ColdFusion MX Administrator (on the Debugging & Logging > Debugging
Settings page). If you select this check box, you must restart ColdFusion MX for this change to
take effect.
cfstat options
The cf_root/bin directory contains the
following switches:
Switch Description
-n Suppress column headers.
-s Display output in a single line.
# Where # is an integer, display
output every # seconds.
This example runs the
cfstat 20
Debugging IP Addresses page
You use the Debugging IP Addresses page to restrict debugging output to one or more IP
addresses. You can add and remove IP addresses.
Note: If you do not specify IP addresses, and debugging options are active, ColdFusion MX displays
debugging output for all users.
utility, ensure that you selected the Enable Performance Monitoring
cfstat
cfstat
utility and displays a new line every 20 seconds:
cfstat
utility. From that directory, type cfstat and use the
Comment
Useful for saving output to a file.
Display a single line and delay display of the first
line so the utility can display meaningful
cfstat
values in the per-second counters.
If you do not specify an integer, the
returns one line. Specify this switch with or without
the -s switch.
Debugging & Logging section
utility
cfstat
29