Adjusting the system parameters
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
Note
When "EPANEL KEY" is set to "EPANEL: OFF' (see page 93), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON
on the remote control instead to adjust the system parameters.
f'lEfrlOP'/ PPOTECT
3
Release INPUT on the front panel.
STANDBY/ON
~
+
2
Press and hold INPUT on the front panel and
press STANDBY/ON on the remote control to
turn on the power of this unit.
"MEMORY PROTECT' is displayed in the front
panel display.
Using the system parameters
._--"'-0
Follow the procedure below to enter the system
parameters.
INPUT
(U.S.A. and Canada models)
1
Press STANDBY/ON on the remote control to
turn off the power of this unit.
STANDBY/ON
~
88
En