Yamaha YSP-3000bl Owner's Manual page 14

Controls and functions
R,mot, control.(Europe, Austlall"AsI';·8I1tlKIIfI. tilOIIIi)
This section describes· the functions of the remote control
used to control this unit. Some buttons marked with an
asterisk (*) share the common functions between the YSP
and TV/AV operation modes (@).
~(j{~
You can also control other components using the remote control
once you set the appropriate remote control codes. See
"Controlling other components" on page 97 for details.
CDr---.....
, - - - - @
_ . . J - - - - - L _
10
En
CD
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
®
STANDBY/ON
Sets this system to the standby mode (see page 31).
@ Transmission Indicator
Lights up when infrared control signals are being output.
G) Input selector buttons
Use to select an input source (DVD, AUX1, AUX2,
AUX3, STB, TV, or FM).
®
VOL MODE
Turns on or off the volume modes (see page 67).
®
AUTO SETUP
Enters the AUTO SETUP menu (see page 35).
(j) CINEMA DSP program buttons
Select the CINEMA DSP programs (see page 63).
®
ENHANCER
Turns on or off the Music Enhancer (see page 66).
®
Cursor buttons
L:::" / '7 /
<l/
~, ENTER
Select and adjust SET MENU items.
@ DISPLAY
Displays information on the selected input signal.
®
VOLUME+/-
Increases or decreases the volume level of this unit (see
page 47).
@ MUTE
Mutes the sound. Press again to restore the audio output to
the previous volume level (see page 47).
@ TV INPUT
Toggles between the input sources on the TV (see
page 97).'
@ CH LEVEL
Adjusts the volume level of each channel (see page 85).
@
TEST
Outputs a test tone when adjusting the output level of each
channel (see page 84).