Edit Storage Server - Canon VB-C300 Administrator's Manual

Do not add the same Storage Server more than once.
If you add a Storage Server with a different configuration
Note
(such as one managed by another Master Storage Server),
your original Locations and Zones will be invalid.
You need to change Windows settings of a storage server to
be added before if you are using Windows XP SP2 or Windows
Server 2003. Refer to "Notes on Operating Environment" (➝ P.
24~27).
Do not change the port number.

Edit Storage Server

In the Storage and Camera Server Summary, select the Storage Servers tab.
1
A list of Storage Servers which have already been added is displayed.
You should change the setting of Storage Server in case of the
IP address of Storage Server has been changed.
Note
The Master Storage Server cannot be edited.
Add Storage Server
Double-click the Storage Server in
2
the list.
Alternatively, select the Storage
Server and click Edit.
This will bring up the Edit Storage
Server dialog.
Change the settings and click OK.
3
To save changes, click
4
Save Changes at the
bottom right-hand corner
of the Camera Summary
window.
Click Discard Changes to
cancel any changes you
have made.
4
89