Canon VB-C300 Administrator's Manual page 195

Tip
●
Using the Camera Control Panel
Pan/Tilt controls. Click
to nudge or click and
Set Night
hold for continuous
Mode.
movement.
Click this button to
Click this button
display exposure to display white
control (➝ P. 196). balance control
(➝ P. 197).
If preset camera
angles have been
set up by your
Switch On and Off of
Administrator, they
external device
will be available from
output of the camera.
a drop-down menu.
Note
If you have camera control, you can only drag the window by
clicking and holding the title bar.
If you did not make any control for 30 seconds, the message of
ÅgControl will be lost in 10 secondsÅh appears, and a 10-
second countdown will start.
You can still manipulate a camera that is currently recording.
If the recording position has been set, the Camera Server will
return to that position after the Viewer release camera control.
Clicking this button
returns the camera
to face the front.
Click this button to
display the smart
shade correction
controls at the
bottom of the panel.
When using the VB-C60/VB-C300, you cannot use Night Mode in
the following cases:
When Day/Night is set to Auto on the Camera and Video Settings page
When the Night Mode is set to Auto with a recording schedule
Panorama picture needs to be set on the Camera Server in
advance. VB-C50FSi/VB-C50Fi cannot display panorama picture.
Arrange Video Windows
To display, select View > Camera Control
from the menu bar, or click the Video
window menu icon (or right-click in the
Video Window) to bring up a context menu
and select Camera Control.
If a Video Window is not selected, the
preview window will be blank. Click on a
Video Window to control the camera.
You can control the pan, tilt, and zoom
operation using a panorama image. Click
inside the Panorama window to adjust the pan
and tile angles so that the clicked position
becomes the center of the image.
Alternatively, you can move or zoom in/out the
yellow scope to perform the pan, tilt, and zoom
operation.
When the Video Window is selected, click Get
Control. Click Release Control when
finished.
If the digital zoom is enabled by the Camera
Server, a boundary between the optical and
digital zoom is displayed.
Click and drag the Zoom slider to perform the
zoom operation.
Click this button to display extended camera
control panel (➝ P. 198).
5
195