Satellite Navigation System With Colour Screen; Updating The Software - PEUGEOT 607 Manual

Table of Contents

Advertisement

80
Satellite navigation system
with colour screen

Updating the software

When you receive the system update
CD-ROMs:
– start the engine to avoid any risk of
switching
to
energy
mode during the operation,
– eject the mapping CD-ROM from
the drive located in the boot,
– insert the software update CD-
ROM in the drive (the indicator
light on the drive comes on perma-
nently); after a few seconds the
screen 'management of software
configuration
of
appears,
15-07-2002
YOUR 607 IN DETAIL
– compare the "System" versions
installed (Multi-function display-D
or Navigation-D) with those of the
CD-Rom in the drive; if a software
version of the CD-ROM (or both) is
later than the version installed,
load the CD-ROM by confirming
"YES"; the red indicator light on
the drive flashes while the data is
being loaded (a few minutes),
– when
Loading End - Eject CD" appears,
remove the software CD-ROM and
insert the mapping CD-ROM in its
place (the indicator light on the
drive comes on permanently after
going out briefly).
General remarks regarding
the display
When using context menus, the
functions are presented in various
ways:
economy
– function selected (text on coloured
background),
– function accesible (black text),
– function inaccesible in this situa-
tion (text on grey background).
the
system
the
message
"Software
9
8
7
6
During off-the-map guidance, the
screen displays the following various
information,
depending
manoeuvres to be carried out:
1 – Next road to be taken,
2 – Estimated time of arrival,
3 – Remaining distance to be trav-
elled,
4 – Diagram of the next crossroads
and direction to be taken,
5 – The direction to your destination,
6 – Street taken,
7 – Symbol showing voice synthesis
status,
8 – Distance remaining before the
next manoeuvre,
9 – GPS status symbol.
1
2
3
4
5
on
the

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 607 and is the answer not in the manual?

Questions and answers

clive
January 23, 2025

have a 607 peugeot only cranking ,but not starting

1 comments:
Mr. Anderson
February 10, 2025

Possible reasons your Peugeot 607 is cranking but not starting include:

1. Fuel Pump Issue: If the fuel pump is receiving only 3-4V instead of the expected voltage, it may not be supplying fuel properly.
2. Starter Motor or Cables: Corroded or faulty connections between the starter, alternator, and battery may cause poor electrical contact.
3. ECU or Immobilizer Problem: If the ECU was recently modified or reset, it may not be communicating correctly, leading to issues like the immobilizer preventing the engine from starting.
4. Battery or Alternator Issue: A weak battery or faulty alternator may not provide enough power for proper ignition.
5. BSI Reset Needed: A malfunctioning Built-in Systems Interface (BSI) might be affecting key electrical functions.

Check the fuel pump voltage, starter connections, battery charge, and ECU status to diagnose the issue.

This answer is automatically generated

This manual is also suitable for:

2002 607

Table of Contents

Save PDF