Advanced Network Settings; Additional Settings - Panasonic SC-AP01 Owner's Manual

Advanced network settings

≥ The below settings are the alternative or
additional settings for "Method 2". (
Alternative settings
Instead of steps 4 and 5:
Select "Manual settings".
1 Type your home wireless network name
into the "Network name (SSID)" field.
2 Select the encryption method from the
"Security system" drop down list.
3 Type the password into the "Password" field
and then select "NEXT".

Additional settings

After step 5 and before step 6:
If your home wireless network has been setup
to use specific IP Addresses, Subnet Mask,
Default Gateway, Primary DNS, etc.
Select "Advanced network settings".
Input the required addresses into each field and
{.
select "OK".
≥ To change the settings back to DHCP, select "ON"
from the "DHCP" drop down list.
If you want to change the name of this unit.
Select "Edit STEREO SYSTEM name".
{. Only ASCII characters can be used.
{. Type a new name into the "STEREO SYSTEM
name" field and select "OK".
8
RQT9655
≥ Enable Java and Cookies in your browser settings.
≥ This unit can also be set using the WPS PIN code.
7)
Replace step 2 of "Method 1" with the following steps.
(Before starting, refer to the wireless network router's
operating instructions for details on how to enter the PIN
code.)
1 While the Wi-Fi
and hold [– WPS] again.
{.
2 Enter the PIN code "64428147" into the wireless
router.
status indicator blinks blue, press
®
The Wi-Fi status indicator blinks purple.
®
Continue to the next step.