Charging From The Usb Port; Network Settings - Panasonic SC-AP01 Owner's Manual

SC-AP01PPC~RQT9655.book 5 ページ ２０１２年２月２日 木曜日 午後１０時４２分

Charging from the USB port

When this unit is turned on and a portable music
player that is compatible to USB charging is
connected to this unit's USB port, charging will start
automatically.
≥ It is not possible to playback the music on the
connected device from this unit's speakers or
operate the device from this unit through this
connection.
≥ Refer to the operating instructions of the device
for details about charging.
Preparation
Turn this unit on.
1
Connect the compatible device to this unit
with an appropriate USB cable.
(DC OUT 5 V, 2.1 A MAX)
≥ Refer to the connected device to check if the
device is fully charged.
2
Once fully charged, remove the USB
cable from this unit.
≥ There is no charging during standby mode.
≥ This unit is capable of charging upto a load of 2.1 A.
≥ When fully charged, this unit will not stop the charging
automatically. Remove the USB cable from this unit once
the connected device is fully charged.
≥ The USB cable is not supplied with this unit. Use the
USB cable that is supplied with the compatible device. If
a USB cable is not supplied with the device, be sure to
use an appropriate USB cable.
Refer to the operating instructions of the device for
details about the appropriate USB cable.

Network settings

To use the AirPlay function, this unit must join the
same wireless network as the compatible device.
(
Preparation
With this unit there are 2 methods to setup the
wireless connection. Determine which type of
wireless network router you are using and follow
the method that matches your device.
≥ Refer to the operating instructions of the wireless
≥ Turn the unit on.
To the
≥ When performing the network settings, place this unit
compatible
device
≥ Simultaneous use with a microwave, cordless telephone
USB cable
≥ Immediately after this unit is turned on, the network
≥ This unit cannot join a wireless network using WEP
≥ To cancel this setting in the middle, press [Í/I] to turn off
≥ For up to date compatibility information on your Wireless
4)
network router for details.
If you do not know which type of wireless network
router you are using, use "Method 2".
close to the wireless router.
and other 2.4 GHz devices may result in connection
interruptions.
setup may take longer to start.
"
security settings with Method 1". Use
the wireless network.
the unit.
router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
(Continues to next page)
"
Method 2" to join
5
RQT9655