WHITE GAIN
You can adjust the brightness of white area of the image. Call
up the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
More natural white
I
Whiter
H
Setting range: 0 to +10
SYSTEM DAYLIGHT VIEW
You can keep the projected image bright and vivid even in well-
lit rooms where the ambient light sources cannot be controlled,
such as when a door opens or when window coverings fail to
block out sunlight. Press I H to cycle through the options.
OFF
Deactive
1
Low
2
Middle
3
High
SHARPNESS
You can adjust the sharpness of the projected image. Call up
the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
Less sharp
I
More sharp
H
Setting range: 0 to +15
NOISE REDUCTION
You can select the automatic noise reduction system strength.
Press I H to cycle through the options.
OFF
Deactive
1
Low
2
Middle
3
High
AI
You can switch on/off the auto iris control system. Press I H
to switch between ON or OFF.
ON
Active
OFF
Deactive
SYSTEM SELECTOR
When the input signal is changed, the projector detects the
colour system and selects the matched setting automatically,
or you can select manually. Press I H to cycle through the
options.
VIDEO/S-VIDEO terminal
AUTO HNTSC HNTSC 4.43 HPAL HPAL-M HPAL-N HSECAM
HPAL60
• AUTO is usually recommended.
• Selecting options of AUTO are NTSC/NTSC 4.43/PAL/PAL-
M/PAL-N/SECAM/PAL60.
RGB 1 IN/RGB 2 IN terminal
480i/576i/576p signals
VGA60/480p signals:
Other signals
• See "List of compatible signals" in the Operating Instructions
that provided with the projector.
SDI terminal (PT-DZ6710 only)
AUTO H 1080⁄60i H 1035⁄60i H 720⁄60p H 1080⁄24p H 1080⁄50i
H 1080⁄30p H 1080⁄25p H 1080⁄24sF H 720⁄50p H 480i H 576i
PICTURE menu
RGB HYC
C
B
R
VGA60 H480p H480pRGB
RGB HYP
P
B
R
E
NGLISH - 17