TP-Link TL-PS310U Hardware Installation
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Print Server
  5. TL-PS310U
  6. Hardware installation

TP-Link TL-PS310U Hardware Installation

Quick installation guide
Hide thumbs Also See for TL-PS310U:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Before you start, you should prepare the following items
Windows 2000/XP/Vista/7 computer with print server setup CD
One USB device with USB port

Hardware Installation

1.
Turn off the USB device's power.
2.
Connect your USB device to the TL-PS310U.
3.
Connect the TL-PS310U to the router or switch/HUB with the Ethernet cable.
4.
Connect the power adapter to the TL-PS310U. When the Link LED lights up,
the TL-PS310U is correctly connected to the network.

Factory Default Settings

IP address: 192.168.0.10/255.255.255.0
Password: the TL-PS310U does not come with a default password.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL-PS310U and is the answer not in the manual?

Questions and answers

Related Manuals for TP-Link TL-PS310U

Summary of Contents for TP-Link TL-PS310U

  • Page 1: Hardware Installation

    Connect your USB device to the TL-PS310U. Connect the TL-PS310U to the router or switch/HUB with the Ethernet cable. Connect the power adapter to the TL-PS310U. When the Link LED lights up, the TL-PS310U is correctly connected to the network.
  • Page 2 Insert the setup CD into your CD-drive. The auto-run program will be started. Select TL-PS310U Choose your operating system to install all software programs. When the installation completed, please DO restart your computer. Restart your computer...
  • Page 3 In this screen, you will see the product listed as MFP and Storage Server -XXXXXX (192.168.0.10). If your computer is not in the 192.168.0.x network segment, it’ll tell you that the TL-PS310U is in different network segment. In this situation, you need to change the IP of the TL-PS310U.
  • Page 4 Configure the IP address of the print server according to your network. And then click Open the above Server Configuration screen again and click Restart Server, so that you can apply the IP configuration. The IP address has been changed...
  • Page 5 The MFP and Storage Server will auto-detect the USB device connecting to the USB port of the TL-PS310U. Connecting to an USB Printer Select the USB printer you want to connect and click Connect Device Because the “Disconnect Printer when Idle” option is enabled by default, the server will tell you this.
  • Page 6 After the driver is installed, the printer will be in your system After finish installing the printer driver, please disconnect the printer manually. And then right-click the printer icon, you can use the “Connect Automatically for Printing” function. You’re highly recommended to use this function for printing.
  • Page 7 Connecting to an USB Drive It’s the same as you connect the printer on the MFP and Storage Server. Select the USB drive you want to connect and click Connect Device After the driver is installed, the Removable Disk will be in your system If you connect the USB devices all the time, other users can’t connect and use them.
  • Page 8 Disconnect manually Select the USB device and click “Disconnect Device” Disconnect when Idle On the top menu, click Options, the “Disconnect Storage Device When Idle” and “Disconnect Printer When Idle” are on the list...

  • Page 9: Technical Support

    Global Australia & New Zealand Tel: +86 755 26504400 Tel: AU 1300 87 5465 E-mail: support@tp-link.com NZ 0800 87 5465 Service time: 24hrs, 7days a week E-mail: support@tp-link.com.au Service time: Monday to Friday 9:00 AM to 9:00 PM AEST...

Table of Contents