Table of Contents
Advertisement
4
Installing and Replacing Optional Cards
Caution
Protect your gateways and other electronic equipment from
electrostatic discharge damage by making sure you are properly
grounded before you touch any component.
Caution
When you handle a NIC, take care not to damage the EMI shield on
the top edge of the faceplate.
Installing Flash Memory PC Cards
This section provides information about how to install or replace additional
nonvolatile random access memory in your gateway by using a flash memory
flash card.
You can order flash memory cards separately and use them with the Nokia
Nokia 100i gateway. The 100i gateway has two PC-card slots that each
support a flash memory card as small as 8 MB and as large as 64 MB. The
slots, also known as PCMCIA slots, permit hot swapping. The two slots are
located on the front panel.
Flash memory cards provide the following:
Data storage
!
Backup and storage of operating system and applications
!
Initial gateway configuration
!
Operating system booting
!
The default boot order is:
1. External flash memory (PC card)
2. Internal flash memory
40
Nokia 100i Installation Guide
Advertisement
Table of Contents
