Table of Contents
Advertisement
Table 3
with output pins on DB9 or DB25 cables you are using with terminal devices
or other appropriate equipment.
Table 3 Pin Assignments for DB9 and DB25 Interface Cables
Console or serial
pin and assignment
Shield (FG)
2 (RXD)
3 (TXD)
4 (DTR)
5 (SG)
6 (DSR)
7 (RTS)
8 (CTS)
Connecting Power and Turning the Power On
The power switch and receptacle for the power cord are located on the back of
the gateway, as shown in
The gateway power supply automatically detects the input voltage (120 VAC
[100 to 130] or 240 VAC [200 to 264]) and configures itself appropriately.
Nokia 100i Installation Guide
on page 31 shows how to match pins at the console or serial connector
DB9 cable-output pin and
assignment
Shield (FG)
3 (TXD)
2 (RXD)
6 (DSR)
5 (SG)
4 (DTR)
8 (CTS)
7 (RTS)
Figure
Performing the Initial Hardware Configuration
DB25 cable-output pin and
assignment
1 (FG)
2 (TXD)
3 (RXD)
6 (DSR)
7 (SG)
20 (DTR)
5 (CTS)
4 (RTS)
6.
31
Advertisement
Table of Contents
