Formatting Sd Cards - DigiTech JAMMAN SOLO Owner's Manual

Formatting SD Cards

It is recommended any memory card that
is inserted into the JamMan
the first time should be formatted using
the JamMan Solo's format procedure. To
format an SD/SDHC Card in the JamMan
Solo, follow these steps:
1. Press and hold the
for six seconds. The DISPLAY will
show FO (Format Card) and the
STORE button will begin flashing.
2. Press the STORE button again. The
DISPLAY will read
and the STORE button will continue
to flash. To abort this procedure,
press the PEDAL SWITCh at any
time.
3. To initiate the card formatting
procedure, press and hold the
STORE button again for two
38
Solo for
®
STORE button
F? (Format ?)
seconds. The DISPLAY will show
indicating the card is being
Bu
formatted.
NOTE: If when you try to format an SD
card the display flashes CP during step 3,
the SD copy protection switch is in the
"Locked" position.