Configuring The Cisco Unified Ip Phone; Adding A New Phone - Cisco CTS-500 Configuration Manual

Configuring the Cisco Unified IP Phone

Cisco WebEx on the Cisco Unified CM
If you are using Cisco Unified CM firmware release 8.0, Cisco WebEx is not enabled by default; you
must enable Cisco WebEx manually in the External Data Locations Information field. See the
Data Locations Information" section on page 2-8
Adding a New Phone with MIDlets Capability
If you are using Cisco Unified CM firmware release 8.0 and wish to enable
phone installations, you must first enable Cisco WebEx in the Web Access field. See the
Specific Configuration Layout" section on page 2-11
Configuring the Cisco Unified IP Phone
Use the information in this section to perform the following tasks:
•
•
The Cisco Unified IP Phone is connected to the Cisco TelePresence device with an Ethernet cable. See
Note
the cabling chapters in the Cisco TelePresence Assembly guides for more detailed cabling instructions.
Go to the Cisco Support Pages to find installation documentation for your Cisco TelePresence System:
Support > Cisco TelePresence > Cisco TelePresence System

Adding a New Phone

To add a new phone, follow these steps:
Step 1 Log in to the Cisco Unified CM Administration interface.
Step 2 From the Device drop-down menu, select Phone. The Find and List Phones Page appears.
Step 3 Choose Cisco 7975 from the Phone Type drop-down menu.
Click Next. The Phone Configuration window appears.
Step 4
Choose SIP from the Select the Device Protocol drop-down menu.
Step 5
Click Next. The Phone Configuration window is updated with the following configuration fields:
Step 6
•
•
•
•
•
•
•
•
•
•
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
2-2
Adding a New Phone, page 2-2
Managing Cisco Unified IP Phones, page 2-3
Device Information
Protocol Specific Information
Certification Authority Proxy Function (CAPF) Information
Expansion Module Information
External Data Locations Information
Extension Information
MLPP Information
Do Not Disturb
Secure Shell Information
Product Specific Configuration Layout
Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets
for more information.
for more information.
"External
MIDlets features on new
"Product
OL-21851-01