Chapter 1
Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Directory Number Information
To configure directory number information, follow these steps:
Enter the directory number settings for the shared Cisco Unified IP Phone 7975 line using the
Step 1
information in
Table 1-23
Field
Directory Number
Route Partition
Description
Alerting Name
ASCII Alerting Name
Make sure that the following check box at the bottom of the Directory Number Information window
Step 2
is marked as indicated:
•
Click Save to save your settings.
Step 3
Directory Number Settings
To configure directory number settings, follow these steps:
Step 1
Select Auto Answer with Speakerphone in the
all other selections. See the
Step 2
Click Save to save your settings.
Call Forward and Call Pickup Settings
Leave all fields unchanged. See the
OL-21851-01
Table 1-23
as a guide.
Shared-Line Directory Number Information
Active: Checked
"Directory Number Settings" section on page
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Assigning a Directory Number for the Shared-Line Cisco Unified IP Phone
Required?
Setting
Yes
Directory number for the Cisco Unified IP Phone 7975.
Note
The number must match the
Cisco TelePresence directory number assigned
in the
Cisco TelePresence Device" section on
page
1-30.
—
<Any>
Auto Answer
"Call Forward and Call Pickup Settings" section on page
"Assigning a Directory Number to the
drop-down menu. Use default settings for
1-33.
1-34.
1-39