JVC GY-DV300U Application Note

Subject: Installing the KA-DV300/350 Network Pack and accessory cards
Objective
Before you can stream video or record to a CompactFlash (CF) memory card, you must attach the KA-DV300 or
KA-DV350 Network Pack to the GY-DV300 camcorder. Once installed, accessory cards, such as a LAN or CF
memory card must be installed.

What you need

•
GY-DV300 camcorder
•
KA-DV300 network pack or KA-DV350 Cisco Aironet 350 enabled network pack
•
One of the following accessory cards, depending on application:
Wired LAN:
Wireless LAN: Linksys (www.linksys.com) WCF11. A type II CF to PCMCIA (PC Card) adapter is
CF Memory:
Attaching the Network Pack to the Camera
1. Insure that the GY-DV300 power is off.
2. Slide the connector cover located on the bottom of the GY-DV300 in the direction as shown by
the arrow located next to the connector cover.
Page 1 of 2

Application Note 1
Socket Communications (www.socketcom.com) EA2900-117. A CF to PCMCIA (PC
Card) adapter is required.
required.
Socket Communications (www.socketcom.com) WL6000-320. A CF to PCMCIA
adapter is required (can only be used with KA-DV300 firmware revision 2.0 or later).
Symbol Technologies (www.symbol.com) Wireless Networker CompactFlash Card.
A CF to PCMCIA (PC Card) adapter is required (can only be used with KA-DV300
firmware revision 2.0 or later).
Cisco (www.cisco.com) Aironet 350 model AIR-PCM35x (can only be used with a
KA-V350 network pack).
SanDisk (www.sandisk.com) SDCFB-16 ~ SDCFB-256. A CF to PCMCIA adapter is
required.
JVC
PROFESSIONAL
PRODUCTS
COMPANY