JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Application Note
Using streamproducer with a microsoft media server
Hide thumbs
Also See for GY-DV300U - 1/3" 3-ccd Dv Camcorder:
- Instruction manual (108 pages) ,
- User manual (42 pages) ,
- Using manual (8 pages)
Advertisement
Quick Links
Subject:
Using Streamproducer with a Microsoft® Media Server
Although it is possible to stream video directly to the internet from a Streamcorder or a locally attached computer, if
you need to provide connectivity to more than a few users, you must use a Media Server. There are several
configurations for streaming from a
Streamcorder through a server, some of
which are shown here:
The first scenario uses an intermediate
computer running Streamproducer to
consolidate the video from multiple
cameras. A separate Media Server is
used to stream the single output of
Streamproducer to the Internet.
We have shown a Hub in this figure;
however, if connecting to a single
camera, this is not necessary.
This is the simplest way to stream to
many users, however, this method
requires an intermediate PC and and
multiple network interfaces in both the PC and server. In some instances where physical access to the Media
may be a valid scenario.
Single Computer Implementation
Described below, is a method for configuring a Media Server with Streamproducer to eliminate the need for an
intermediate computer. This can be done either with a second network interface in the server, as discussed here,
or connecting through a switch.
The advantages of this method are obvious...less hardware means lower cost, and fewer things to go wrong!
Page 1 of 4
Application Note 6
JVC
PROFESSIONAL
PRODUCTS
COMPANY
Server is limited or permission to install
software on the M edia Server is denied, this
may be a valid scenario.
An alternate but similar scenario, shown here,
may
more
closely
resemble
implemented in your location, An intermediate
computer,
possibly
with
interfaces ,
running Streamproducer is still
required, but is now connected to the Media
Server through a switch
This method does not require the additional
network interface in the server. Again, in some
instances where physical access to the Media
Server is limited or permission to install
software on the Media Server is denied, this
what
is
two
network
Advertisement
Related Manuals for JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder
Summary of Contents for JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder
- Page 1 PROFESSIONAL PRODUCTS COMPANY Application Note 6 Subject: Using Streamproducer with a Microsoft® Media Server Although it is possible to stream video directly to the internet from a Streamcorder or a locally attached computer, if you need to provide connectivity to more than a few users, you must use a Media Server. There are several configurations for streaming from a Streamcorder through a server, some of which are shown here:...
- Page 2 Install Streamproducer on your media server. The installation process is the same as that of any Windows based operating system. Refer to your User’s Guide for details. Please note that you will need to reboot the server after Streamproducer installation If possible, t he cameras and servers’...
- Page 3 In the ‘Broadcast Unicast Publishing Points’ dialog box, select ‘Use wizard…’ as shown above. Click on the ‘Broadcast’ bar and select ‘New’. The wizard will make it easy to configure the server for this application. When asked, select ‘Create a broadcasting publishing point’ and click ‘Next’.
- Page 4 This completes the configuration of a typical Media Server with Streamproducer. This is just one example, and the cameras that Streamproducer connects to can be local or anywhere in the world. JVC is sorry, but beyond this application note, we cannot support your server configuration. There are just too many possible server variations and configurations for us to be able to support.